Ajinkya Electronic Systems
Ajinkya Electronic Systems
Mahim, Mumbai, Maharashtra
Send E-mail
Send SMS
Home  » We Manufacture  » 

Electronic Instruments for Electroplating


We are involved in designing, manufacturing and exporting of efficient and durable electronic instruments which are widely used in the electroplating processes. All our instruments are fabricated at an in-house manufacturing unit which is well equipped with all the latest machines and technologies in order to facilitate a rapid production rate. These products are also quality tested on different parameters to make sure that highest international standards are adhered to. All these instruments are vital in carrying out the electroplating process in an effective manner.

Ask for Price

The IM2503 model integrates wholesome electroplating control which is covenient for the users.
Two relay output s which is used for controlling the addition of chemicals including additives and brightners. During the entire process more charge is taken from the bath which results in the decrease of net concentration.Count of totaliser tell about the charge which is being drawn from the bath. After assessing the count, the ampere hour could be managed in sync with which chemicals can be added.

Features:

  • One set point with relay output rated 230 V / 5 A (resistive)
  • Two relay outputs for doser control which operates on totaliser count
  • Ampere Hour / Ampere Minute selection
  • Ampere hour resolution for lower ampere shunt ratings
  • Shunt value programmable at 75mV
  • External Reset facility

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

We offer a varied range of microcontroller based accurate and reliable Timers which is in great demand in domestic as well as international markets. It is provided with 4 or 6 digit single or dual display which is in compliance with latest industry standards. The product is widely appreciated by our clients for its unmatched accuracy and efficiency.

 

Some of the features of the product are as follows:

  • Display: 4 / 6 digit Single / Dual
  • Settings: Membrane Keyboard
  • Ranges: Various from 0.01 sec to 9999 hrs.
  • Resolution: Minimum 1 m/ sec possible
  • Count Mode: Up / Down
  • Output: Up to 4 Relays. More relays possible externally.
  • Battery Backup : Optional
  • Other Options : RS232 / Modbus Connectivity / Real Time operation.

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

We offer IM2502 ampere hour / minute meter which is advance model of IM2501. Beside, from basic regular counting of ampere hour/minute or seconds, this one comes with totalizer. The totalizers is vital for all electroplating usages as this on manages the concentration of bath and also take care that over of additions of chemical. In a addition to the, features of IM2501 like preset setting and relay output are integrating in this one as well. Moreover, there is an additional counter for total AH (ampere hour) or AM (ampere minutes) flowing through the circuit.

Some of the pertinent Features of the product are mentioned below:

  • Four 6 digit display
  • Current (Ampere) display
  • 6 digit totaliser
  • 0.1 Ampere hour resolution for lower ampere shunt ratings
  • one set point with relay output
  • Memory retentionin case power failure


Additional Information:
  • Item Code: IM2502

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

We offer a wide range of Temperature Controllers which play a pivotal role in the electroplating of metals. Our experts design a wide range of on/off as well as PID type temperature controllers which are primarily used to control the temperature of baths.

 

Some of the main characteristic features of temperature controllers are as follows:

  • Membrane keypad for programming
  • Two set points for high and low set points
  • Control parameters settable in case of PID controller
  • One Relay Output rated 230 V /6 A

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Our clients are absolutely satisfied with the range of fabricated Temperature Indicators provided by us. These indicators are available with different sensor inputs and various digital sizes ranging between 0.5” to 1 ft. our products are known for their superior features like low maintenance and rugged construction.

 

Some added advantages of our indicators are listed below:

  • Display size from 0.5” / 1” / 2” / 4” / 6” / 1ft etc
  • Keyboard for programming
  • RTD Pt 100 / Thermocouple input
  • High low alarm setting
  • One relay output 230 V / 5A rated.


Additional Information:
  • Minimum Order Quantity: 10 Pieces

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Our range of IM2501Ampere Meter is integrated with a set point to control the rectifier. Meter operates a relay, when some amount of charge is made to pass.This relay is basically used to shut off from the rectifier and are used in the completion of the job.

IM2501, We offer is one of the well known common models and designed for measurement in charge which is basically for electroplating bath External shunt is responsible for direct input and also calculates the charge via circuit frequently.

Features of IM2501 are as follows:

  • Dust proof membrane keypad
  • One set point with relay output rated 230V / 5 A (resistive)
  • Ampere Hour / Ampere Minute Selection
  • Shunt value programmable at 75mV
  • External Reset facility
  • Retention of count in case of power failure

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Ampere Hour Meter Module- Model TE 2504 is basically managed for ready setup or the usage can be seen in where the current requirement are low. This one is used which is ready to be applied in the stand alone panel and advanced from all the former models, IM2501, IM2502 and IM2503. These are basically panel mount instruments which are required to rectified in the rectifier or in an independent panel.

Featured of Ampere Hour Meter Module are mentioned below:

  • Ready to use module, no extra wiring needed
  • Additional high power relay provision
  • Direct plug in socket for rectifier
  • Audio / Visual alarm indication
  • Banana plug terminals for connecting shunt
  • Auto Manual switch for rectifier control

Yes! I am Interested


Ask for Price

Our range of IM2509 model ampere hour meter is provided with three control relay outputs to facilitate addition of three chemicals. It should be noted that this feature is improvement over the IM2503 model which offers two control relay outputs to control a addition of two chemicals.

Some of the features of this model are provide below:

  • 4 plus 6 digit displays for current flowing, totaliser and present ampere hour
  • Three doser control relay output with programmable counts
  • One set point with one control relay output
  • Ampere hour / ampere minute selectable
  • Shunt value programmable at 75 MV / 200 MV / 60 MV
  • Ampere hour resolution for lower ampere shunt ratings
  • CAlibration output for ease of calibration

IM2513 Master Slave Ampere Hour Meter for doser control (maaster/slave unit)

This model is apt for the plants where so many jobs take place in the by engaging independent rectifiers in common bath. This IM2513 model is basically master controller that is joined to numerous IM2502 ampere hour meters and make to the totaliser counts which are according to hour meter. Also, relies on the net count. This one also manage the two doser relay outputs and chemicals like additive and brightener to the bath.

 


Yes! I am Interested


 






Corporate Brochure



X

 

 

Send SMS
Ajinkya Electronic Systems
Rajesh Doshi  (Managing Partner)
No. 131, Kakad Industrial Estate Off L. J. Cross Road No. 3, Mahim [West]
Mumbai - 400016 , Maharashtra , India
Send E-mail