Ajinkya Electronic Systems
Ajinkya Electronic Systems
Mahim, Mumbai, Maharashtra
Send E-mail
Send SMS
Home  » We Manufacture  » 

Battery Charging - Monitoring Products


Providing you the best range of six digits ampere hour meter, discharge timer, ampere hour meter with totaliser, kah meter, ampere hour/ minute meter im2501 and ampere hour meter with current limit with effective & timely delivery.

REQUEST CALLBACK
Ask for Price

We offer IM2506 model which provides 6 digit display as compare to IM2501 Ampere Hour Meter which has 4 digit display. This model can be used with any circuit as the shunt valve can be programmed by the user. The equipment is provided with one relay output to alert the user when the sufficient charge has been delivered. It is also used to directly cut off the rectifier.

 

Some of the features of this model are as follows:

  • Range 0-999999 Ah
  • Least count 0.1 Ah for shunt value less 25A
  • Accuracy +/-1% of current range
  • Shunt Input 0-75 MV
  • Shunt value programmable 1 to 9999 amperes
  • Current (ampere) display with key press
  • Battery back up to retain count in case of power failure

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

We provide quality tested Discharge Timer with data logging facility. It is available in hours/ minutes/ seconds as per the specification of our esteemed clients.

 

Some of the salient features of this product are as follows:


  • Facility to log in voltage
  • Can log in current
  • Option to log in temperature and specific gravity values against time
  • Can be connected to PC
  • Data can be printed in tabular or graphical format.

Yes! I am Interested


Ask for Price

We offer ampere hour meter with totaliser under the model no. IM2502. This model is a step ahead of the IM2501 model and it provides a totaliser display along with ampere hour/ ampere minute display. Also, all the features of the earlier models are retained. Some of these features are mentioned below:

  • Membrane keypad for programming
  • One set point with relay output rated 230 V / 5 A (resistive)
  • Ampere Hour / Ampere Minute selection
  • Shunt value programmable at 75mV
  • External Reset facility.

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

We also design and produce highly efficient IM2501k KAH meters which are widely used in applications related to submarine and telecom.In these sectors, huge battery systems are used and current flow is kiloamperes. This model offered by us is capable of providing current and ampere hour display directly in kilo ampere hours.


Following are some of thre features of the product:


  • Shunt value programmable
  • Relay output for rectifier control with one set point
  • Battery back upto store reading in case of power failure

Yes! I am Interested


Ask for Price

Our range of ampere hour meter – IM2501 monitors the current flow through the circuit and the charge through the battery which is very important for battery charging or discharging applications.

 

Some of the advantages of this model are:


  • Shunt value can be programmed by the user, so suitable with any circuit
  • Provided with one relay output in order to warn the user whether the required charge has been delivered or just to directly cut off the rectifier

    Here are some of the features of the product:

    • 8 key membrane keypad
    • One set point with relay output rated 230 V / 5 A (resistive)
    • Ampere Hour / Ampere Minute selection
    • Shunt value programmable at 75mV
    • External Reset facility
    • Size 96x96 mm depth 150 mm

Yes! I am Interested


Ask for Price

While the charging process, when a battery is sufficiently charge, the current flow drops to a lower level. At this juncture, the battery must be disconnected from the source of power. Our high quality IM2512 model is capable of operating in two different modes. The operational details are provided below:

  • The relay operates when ampere hour value reaches the set point, this is in accordance to a preset
  • Has current limit value with a delay timer: as the current drops below a certain limit value and remains for more than delay time, the relay will operate
  • Relay can be used to cut off the battery
  • The model has a totaliser similar to IM2502


    Some of the features of the product are:

    • 4 plus 6 digit LED display for showing current flowing in circuit, ampere hour count and totaliser count on key selection
    • Shunt value programmable from keyboard
    • Floating decimal point depending on shunt value programmed.
    • Ampere Hour / Ampere Minute display selectable from keyboard
    • One programmable preset count with relay output to control charging rectifier
    • Battery back up to retain the count in case of power failure.

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

We are engaged in providing IM2508 ampere hour profile meter which is a programmable step profile type device. During the battery formation process, the battery must be charged at different ampere hour capacity in steps. Some of the special features of the product include short circuit monitoring, starting current control and bar forming timer.

 

Other features of this model are listed below:


  • 4 plus 6 digit display for AH meter and step programming
  • Three relay outputs for C1 / C2 and short circuit
  • Analog voltage output for current control of external rectifier
  • Back up to retain count and status in case of power failure
  • Programmable bar charge / short circuit timings
  • Optional Modbus Serial interface
  • Shunt value programmable at 75 / 100 / 60 mv.


Additional Information:
  • Item Code: IM2508

Yes! I am Interested


Ask for Price

Charge discharge type battery monitoring ampere hour meter - IM 2505

This battery monitoring device is capable of monitoring the status of the battery at any given instance of time as it is permanently connected to the battery bank circuits. Following is the step wise description of how this model functions:

  • as the battery discharges, ah count will automatically decrease
  • when ah reaches the lower set point, relay will operate
  • used to either generate warning alarm or switch of discharger or start charger
  • relay remains operational till battery is charged to its full level

    Features of the product are given below:

    • shunt value programmable
    • ah / am mode selection
    • one relay output rated 230 v / 5a
    • battery capacity and discharge minimum level programmable
    • size 96x96 mm depth 150 mm

Yes! I am Interested


Ask for Price

The range of IM2507 model charge discharge ampere hour meter provided by us has some advanced features which makes it a highly sough after product in different industries. It has two independent 4 digit displays for separate charge and discharge counting. While one display counts the charge through the circuit, the other counts the discharge. Some other features of IM2507 model are as follows:

  • 4 digit two row LED displays for charge and discharge
  • Independent reset for charge discharge counts
  • Shunt value programmable at 75 mV
  • Battery back up to retain count in case of power failure

Yes! I am Interested


Ask for Price

This model is advancement over the IM2505 ampere hour meter. It is provided with an additional totaliser which monitors the total charge and total discharge through the circuit. It also keeps a track of the total number of cycles of charge and discharge in a circuit. Very battery that is used in different applications has a definitive life cycle based upon the total number of charge and discharge cycles. So, this model enables our clients to keep a track of the life cycle of the battery.

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

We offer life cycle testers which are widely utilized by our clients for testing life cycle of the batteries. The product has programmable charge & discharge and delay timings. Also, the exact number of cycles van be programmed and calculated by these testers which are rigorous rounds of quality assurance tests in order to make sure that it meets the high international standards. The life cycle tester can be directly connected to a PC or printer for generating instant reports.

Features of Life Cycle Timer:

  • Dust proof membrane keypad
  • Charge / discharge / delay timing programmable in hours/minutes
  • Number of cycles programmable
  • Internal back to retain values in case of power fail
  • Optional PC Interface
  • Battery voltage / current logging
  • Optional parallel printer interface
  • Option of Voltage / Current reading
  • Data logging facility

Yes! I am Interested


Ask for Price

These products are manufactured at our in-house manufacturing unit which has all the latest machines and tools to facilitate a rapid turnaround rate. We also a have a team of quality experts who conduct regular quality assurance tests at different stages of production to make sure that the final product is truly world class. These timers are also used for determining the life cycle of the batteries. The product is provided with charging and discharging timing options which can be easily programmed by the user. This feature makes this range user-friendly and easily operational.

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

We offer efficient and quality assured DC Wattmeters under the series IM2600 for measuring DC power in a load. Only genuine raw material is employed in the production stage to make sure that the quality of the final product is of high industry standards.

 

Some of the features of the products are listed below:

  • DC Voltage input
  • Current input 75mA
  • Shunt value programmable
  • Display of voltage, current, wattage and Ampere Hour
  • Size 96x96 mm depth 160 mm.

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

We are also engaged in offering Charger Timer with data logging option. This timer has the option of logging battery voltage and current and test report can also be instantaneously generated as it can be connected to a PC.

 

Some of the features of the product are as follows:


  • Bright red LED display for time indication
  • Voltage / Current / Temperature reading
  • Parallel printer interface to print report in text format
  • Time programmable in hours / minutes
  • Relay output to control external rectifier.

Yes! I am Interested


Ask for Price

Our clients use this timer when they need to simultaneously compare three batteries. Our range of battery comparative test timer with data logger is capable of comparatively testing up to three batteries under constant current discharge. It is so skillfully designed that can bypass battery as voltage drops below the end voltage. The product can easily log voltage, current, temperature and specific gravity against time. Also, the battery can be automatically calculate and printed (online option available) when the test ends.

Yes! I am Interested


 






Corporate Brochure



X

 

 

Send SMS
Ajinkya Electronic Systems
Rajesh Doshi  (Managing Partner)
No. 131, Kakad Industrial Estate Off L. J. Cross Road No. 3, Mahim [West]
Mumbai - 400016 , Maharashtra , India
Send E-mail